R8-ND1 POWER/NETWORK MODULE

Detail

·Some details are not shown. Please refer to specification sheets for all information.

R8-ND1

Remote I/O R8 Series

POWER/NETWORK MODULE
(DeviceNet)

Functions & Features
• Free combination of analog and discrete I/O
• Space-saving
Typical Applications
• Remote I/O for DCS and PLC
 

MODEL: R8–ND1–R[1]

ORDERING INFORMATION
• Code number: R8-ND1-R[1]
Specify a code from below for [1].
  (e.g. R8-ND1-R/Q)
• Specify the specification for option code /Q
  (e.g. /C01)

MODULE TYPE
ND1: DeviceNet

POWER INPUT
DC power
R: 24 V DC
(Operational voltage range: ±10 %; ripple 10 %p-p max.)

[1] OPTIONS
blank: none
/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
/C02: Polyurethane coating

RELATED PRODUCTS
• PC Configurator cable (model: COP-US)
• PC configurator software (model: R8CFG)
• EDS file
The EDS files and configurator software are downloadable at M-System’s web site.

PACKAGE INCLUDES...
• Protective cover

GENERAL SPECIFICATIONS
Connection
•Power input, excitation supply: Tension clamp (Front Twin　connection)
  Applicable wire size: 0.2 - 2.5 mm²
  Stripped length: 10 mm
•DeviceNet: Tension clamp (Front Twin　connection)
•Internal bus, internal power and excitation supply: Connector
Max. number of I/O modules: 16
(Max. consumption current of I/O modules: 1.6 A)
Isolation: DeviceNet to internal bus or internal power or power input to exc. supply to FE1
Status indicators: Power, RUN, NS, MS
Data allocation: Mode 1, 2

DeviceNet COMMUNICATION
Node address setting: Set with rotary switch; 00 – 63
Baud rate setting: Set with rotary switch; 125 kbps, 250 kbps, 500 kbps
Transmission cable: Approved for DeviceNet
 Stripped length 10 mm
I/O data allocation size: 8 to 64 words (variable)

INSTALLATION
Power consumption
•DC: Approx. 12 W 24 V DC (@ internal power max. current 1.6 A) )
Internal power supply (power supply for I/O module):
• DC power supply: 5 V DC
• Current capacity: 1.6 A
Excitation supply output (excitation for I/O module)
•DC: 24 V DC ±10 %
•Operational current: 10 A
 (From power supply (exitation supply) connector, via connector for internal bus, supplied to each I/O module. Power output current consumption must be under operational current.)
Supply voltage to network: 11 – 25 V DC supplied through the network terminal block
Supply current to network: 50 mA max.
Operating temperature: -10 to +55°C (14 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: DIN rail
Weight: 180 g (0.40 lb)

PERFORMANCE
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 1500 V AC @ 1 minute
(DeviceNet to internal bus or internal power or power input to exc. supply to FE1)

STANDARDS & APPROVALS
EU conformity:
EMC Directive 
  EMI EN 61000-6-4
  EMS EN 61000-6-2
RoHS Directive
  EN 50581

EXTERNAL VIEW

CONNECTION DIAGRAMS

EXTERNAL DIMENSIONS unit: mm (inch)

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
Note: In order to improve EMC performance, bond the FE1 terminal to ground.
Caution: FE1 terminal is NOT a protective conductor terminal. 

M-System Co., Ltd.