R5-EX1 EXTENDER POWER MODULE BASE

Detail

·Some details are not shown. Please refer to specification sheets for all information.

R5-EX1

Remote I/O R5 Series

EXTENDER POWER MODULE BASE

MODEL: R5-EX1[1]

ORDERING INFORMATION
• Code number: R5-EX1[1]
Specify a code from below for [1].
  (e.g. R5-EX1/Q)
• Specify the specification for option code /Q
  (e.g. /C01)

[1] OPTIONS
blank: none
/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
Only solder side of the main PWB is coated.
/C01: Silicone coating
/C02: Polyurethane coating
/C03: Rubber coating

GENERAL SPECIFICATIONS
Connection: 20-pin connector
Housing material: Flame-resistant resin (gray)

INSTALLATION
Operating temperature: -10 to +55°C (14 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: Surface or DIN rail
Weight: 40 g (1.4 oz)

PERFORMANCE
Insulation resistance: ≥ 100 MΩ with 500 V DC
(internal power or internal bus to ground)
Dielectric strength: 2000 V AC @ 1 minute
(internal power or internal bus to ground)

STANDARDS & APPROVALS
EU conformity:
EMC Directive 
  EMI EN 61000-6-4
  EMS EN 61000-6-2
RoHS Directive
  EN 50581

EXTERNAL DIMENSIONS unit: mm (inch)

M-System Co., Ltd.