R30GCIE1 CC-Link INTERFACE MODULE

Detail

·Some details are not shown. Please refer to specification sheets for all information.

R30GCIE1

Remote I/O R30 Series

CC-Link INTERFACE MODULE
(CC-Link IE Field network)

Functions & Features
• Enables interface modules that use different protocols to handle data on CC-Link IE Field Network (gateway module).
• Recognized as an analog I/O mixed module by other interface modules.
• Used as a remote device station on CC-Link IE Field Network in the same manner as R30NCIE1.
Typical Applications
• A gateway for CC-Link IE Filed and EtherCAT.

MODEL: R30GCIE1S[1]

ORDERING INFORMATION
• Code number: R30GCIE1S[1]
Specify a code from below for [1].
  (e.g. R30GCIE1S/Q)
• Specify the specification for option code /Q
  (e.g. /C01)

COMMUNICATION MODE
S: Single

[1] OPTIONS
blank: none
/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
/C02: Polyurethane coating
/C03: Rubber coating

CAUTION
・Please use this unit with a network module (model: R30NECT1) of firmware version V1.04.10 or higher, and a network module (model: R30NCIE1) of firmware version V1.01.13 or higher.

RELATED PRODUCTS
• PC configurator software (model: R30CFG)
Downloadable at M-System’s web site.
For connecting to PC, use commercially available Mini-B type USB cable. (provided by user)

GENERAL SPECIFICATIONS
Connection
  CC-Link IE Field: RJ-45 connector
  Internal bus: Via the Installation Base (model: R30BS)
  Internal power: Via the Installation Base (model: R30BS)
Isolation: CC-Link IE Field to internal bus or internal power
Internal bus communication cycle: Approx. 1 msec.
Status indicator: RUN, RD, SD, D LINK, ERR, L ER, LINK
(Refer to the instruction manual.)

CC-Link IE Field COMMUNICATION
Protocol: IEEE 802.3
Transmission type: 1000BASE-T
Communication speed: 1 Gbps
Network cable: Cable conformed to CC-Link IE Field
Double shielded twist pair cable (CAT5e)
RJ-45 connector
Network topology: Line, star and ring
Max. number of stations: 120 (Total slave stations)
(Number of max. connectable slaves may vary depending on the master module. Refer to the instruction manual of the master module)
Max. station-to-station distance: 100 m
Station type: Remote device station
Link device: RX/RY 112 points, RWw/RWr 64 points
NetWork No.: 1 to 239 (factory default: 1)

INSTALLATION
Current consumption: 140 mA
Operating temperature: -10 to +55°C (14 to 131°F)
Storage temperature: -20 to +65°C (-4 to +149°F)
Operating humidity: 10 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: Installation Base (model: R30BS)
Weight: 125 g (0.28 lb)

PERFORMANCE
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 1500 V AC @ 1 minute (CC-Link IE Field to internal bus or internal power)
1500 V AC @ 1 minute (power input to FE; isolated on the power supply module)

STANDARDS & APPROVALS
EU conformity:
EMC Directive 
  EMI EN 61000-6-4
  EMS EN 61000-6-2
RoHS Directive
  EN 50581

EXTERNAL VIEW

TRANSMISSION DATA DESCRIPTIONS
Number of transmission data: 4 points (4 words) for input; 4 points (4 words) for output
This unit is equivalent to an analog I/O mixed module (AIO4) of R30 series, and is recognized as an I/O module by Interface module (e.g. model: R30NECT1).
Station type: Remote device station
Link device: RX/RY 112 points, RWw/RWr 64 points

EXTERNAL DIMENSIONS unit: mm (inch)

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

SYSTEM CONFIGURATION EXAMPLES
The below figure shows a system configuration example in which CC-Link IE Field data is converted into EtherCAT data by using this unit as a gateway.

M-System Co., Ltd.