R3-DA32A DISCRETE INPUT MODULE

Detail

·Some details are not shown. Please refer to specification sheets for all information.

R3-DA32A

Remote I/O R3 Series

DISCRETE INPUT MODULE
(Di 32 points; with external excitation supply)

MODEL: R3–DA32A[1][2]

ORDERING INFORMATION
• Code number: R3-DA32A[1][2]
Specify a code from below for each of [1] and [2].
  (e.g. R3-DA32AW/12/CE/Q)
• Specify the specification for option code /Q
  (e.g. /C01)

NO. OF CHANNELS
32: 32

EXCITATION SUPPLY
A: External excitation

[1] COMMUNICATION MODE
S: Single
W: Dual

[2] OPTIONS (multiple selections)
External Excitation
blank: 24 V DC
/12: 12 V DC
/5: 5 V DC
Standards & Approvals
blank: Without CE
/CE: CE marking
Other Options
blank: none
/Q: Option other than the above (specify the specification)

SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
/C02: Polyurethane coating
/C03: Rubber coating

RELATED PRODUCTS
• Connector terminal block (model: CNT)
• Special cable with 40-pin connector (model: FCN)

GENERAL SPECIFICATIONS
Connection
  Internal bus: Via the Installation Base (model: R3-BSx)
  Input: 40-pin connector (Fujitsu FCN-365P040-AU)
  Internal power: Via the Installation Base (model: R3-BSx)
Isolation: Di 11 thru 18 to Di 21 thru 28 to Di 31 thru 38 to Di 41 thru 48 to internal bus or internal power
RUN indicator: Bi-color (red/green) LED;
Red when the bus A operates normally;
Green when the bus B operates normally;
Amber when both buses operate normally.
ERR indicator: Green LED turns on in normal operating conditions.
Input status indicator: Red LED; turns on with the input ON.
Group selector: Switches the input status indicator
 A. 1 - 8: Di11 - Di18
     9 - 16: Di21 - Di28
 B. 1 - 8: Di31 - Di38
     9 - 16: Di41 - Di48
Read rate: 1 / 5 / 10 / 20 / 50 / 70 / 100 / 200 msec. selectable with DIP SW

INPUT SPECIFICATIONS
Input: 24 V DC / 12 V DC / 5 V DC, 32 points
Isolation: Optical isolator
Input resistance:
Approx. 9 kΩ (24 V DC)
Approx. 4 kΩ (12 V DC)
Approx. 1.5 kΩ (5 V DC)
Common: Positive or negative common (NPN/PNP) per 8 points
Rated voltage
•24 V DC (±10 %, Ripple ≤ 5 %p-p)
•12 V DC (±10 %, Ripple ≤ 5 %p-p) 
•5 V DC (±10 %, Ripple ≤ 5 %p-p)
Rated current: Approx. 3 mA
ON current/ ON resistance:
≥ 2 mA/ ≤ 3 kΩ (24 V DC)  
≥ 2 mA/ ≤ 1.5 kΩ (12 V DC)
≥ 2 mA/ ≤ 500 Ω (5 V DC)
OFF current/ OFF resistance: 
≤ 1 mA/ ≥ 6 kΩ (24 V DC)
≤ 1 mA/ ≥ 3 kΩ (12 V DC)
≤ 1 mA/ ≥ 1.5 kΩ (5 V DC)
Detection levels
 ON: 
 ≥ 18 V (24 V DC)
 ≥ 8 V (12 V DC)
 ≥ 3 V (5 V DC)
 OFF:
 ≤ 9 V (24 V DC)
 ≤ 4 V (12 V DC)
 ≤ 1.5 V (5 V DC)

INSTALLATION
Operating temperature: -10 to +55°C (14 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: Installation Base (model: R3-BSx)
Weight: 150 g (0.33 lb)

PERFORMANCE
Data allocation: 4
Current consumption: 90 mA
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 500 V AC @ 1 minute (Di 11 thru 18 to Di 21 thru 28 to Di 31 thru 38 to Di 41 thru 48)
2000 V AC @ 1 minute (input to internal bus or internal power)
2000 V AC @ 1 minute (power input to FG; isolated on the power supply module)

STANDARDS & APPROVALS
EU conformity:
EMC Directive 
  EMI EN 61000-6-4
  EMS EN 61000-6-2
RoHS Directive
  EN 50581

EXTERNAL VIEW

EXTERNAL DIMENSIONS unit: mm (inch)

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

INPUT CONNECTOR (40-pin)

M-System Co., Ltd.