R7G4HH-A-SVF4 HI-SPEED LINK SYSTEM I/O MODULE

Detail

·Some details are not shown. Please refer to specification sheets for all information.

R7G4HEIP

Remote I/O R7G4H Series

EtherNet/IP I/O MODULE

 

MODEL: R7G4HEIP-6-[1]-R[2]

ORDERING INFORMATION
• Code number: R7G4HEIP-6-[1]-R[2]
Specify a code from below for each of [1] and [2].
  (e.g. R7G4HEIP-6-DC16A-R/Q)
• Specify the specification for option code /Q
  (e.g. /C01)

TERMINAL BLOCK: 6
  Screw terminal block for power  supply
  RJ-45 Modular jack for communication
  Screw terminal block for I/O

[1] I/O TYPE
DA16: NPN/PNP discrete input, 16 points
DC16A: NPN transistor output, 16 points
DC16B: PNP transistor output, 16 points

POWER INPUT
DC power
R: 24 V DC
(Operational voltage range: ±10 %; ripple 10 %p-p max.)

[2] OPTIONS
blank: none
/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
/C02: Polyurethane coating
/C03: Rubber coating

FUNCTIONS & FEATURES
R7G4HEIP as an EtherNet/IP I/O module
• Interfaces PLC (programmable logic controller) and discrete I/Os via EtherNet/IP.
• Supports DLR (Device Level Ring) to form a ring topology.
• Employs a removable two-piece terminal block that allows module replacement without disconnecting wiring.

RELATED PRODUCTS
• PC configurator software (model: R7CFG)
• EDS file
The EDS files and configurator software are downloadable at M-System’s web site.
For connecting to PC, use commercially available Mini-B type USB cable. (provided by user)

GENERAL SPECIFICATIONS
• Common Specifications
Power input: 24 V DC ±10 %; ripple 10 %p-p max.
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 1500 V AC @1 minute
(between isolated circuits)
Operating temperature: -10 to +55°C (14 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Storage temperature: -20 to +65°C (-4 to +149°F)
Mounting: DIN rail (35 mm wide)  or wall
Connection
 EtherNet/IP: RJ-45 modular jack
 Power & I/O: M3 separable screw terminals
 (torque 0.5 N·m)
Screw terminal material: Nickel-plated steel
Solderless terminal: Refer to the drawing at the end of the section.
   Recommended manufacturer: Japan Solderless Terminal MFG.Co.Ltd, Nichifu Co.,ltd 
  Applicable wire size: 0.25 to 1.65 mm² (AWG22 to 16)
Housing material: Flame-resistant resin (gray)
Status indicator LEDs: PWR, RUN (Refer to the instruction manual for details)
■ Current Consumption & Weight
R7G4HEIP-6-DA16: Approx. 45 mA, 200 g (0.44 lb)
R7G4HEIP-6-DC16A: Approx. 50 mA, 200 g (0.44 lb)
R7G4HEIP-6-DC16B: Approx. 50 mA, 200 g (0.44 lb)
(Discrete I/O load charge is not included in the above-mentioned current consumption.)

EtherNet/IP COMMUNICATION
Communication Standard: IEEE 802.3u
Transmission: 10BASE-T, 100BASE-TX
Baud rate: 10/100 Mbps (Auto Negotiation function)
Protocol: EtherNet/IP
Max. number of socket connections: 3
Connection type: Exclusive owner / Listen only / Input only 
Transmission media: 10BASE-T (STP, Category 5), 100BASE-TX (STP, Category 5e)
Network topology: Line, star and ring
Max. length of fieldbus segment: 100 meters
IP address: 192.168.0.250 (factory setting);
Only host address in IP address is configurable via rotary switches, the other items via PC configurator software (model: R7CFG).
DLR supported
Port No.: 2222, 44818 
I/O data size: One (1) word
Status indicator LEDs: MS, NS (Refer to the instruction manual for details)

STANDARDS & APPROVALS
EU conformity:
EMC Directive 
  EMI EN 61000-6-4
  EMS EN 61000-6-2
RoHS Directive
  EN 50581

EXTERNAL VIEW

CONNECTION DIAGRAMS

I/O DATA DESCRIPTIONS

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm

MOUNTING REQUIREMENTS unit: mm (inch)

M-System Co., Ltd.