MDP-SP LIGHTNING SURGE PROTECTOR FOR LOW FREQUENCY USE
Tình trạng: In stock
Contact: 0989649965
Số lượt xem: 1167
Detail
·Some details are not shown. Please refer to specification sheets for all information.
MDP-SP
Lightning Surge Protectors for
Electronics Equipment M-RESTER
LIGHTNING SURGE PROTECTOR FOR
LOW FREQUENCY USE
Functions & Features
• Designed specifically to protect frequency generating devices such like flowmeters and frequency transmitters from lightning surge damage that enters on the wiring between these instruments
• Absorbs surges only without affecting instrumentation signal
• No interruption of signal by unplugging the protector element
MODEL: MDP–SP[1]
ORDERING INFORMATION
• Code number: MDP-SP[1]
Specify a code from below for [1].
(e.g. MDP-SP/A33/Q)
• Specify the specification for option code /Q
(e.g. /C01)
[1] OPTIONS (multiple selections)
DIN Rail Mounting Adapter
blank: Without
/A33: With adapter (model A-33)
Other Options
blank: none
/Q: Option other than the above (specify the specification)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
/C02: Polyurethane coating
/C03: Rubber coating
GENERAL SPECIFICATIONS
Construction: Plug-in
Connection: M4 screw terminals (torque 0.8 N·m)
Screw terminal: Nickel-plated steel
Housing material: Flame-resistant resin (black)
INSTALLATION
Operating temperature: -5 to +55°C (23 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Surface or DIN rail
Weight: 140 g (0.31 lb), standard
165 g (0.36 lb), with DIN rail mounting adapter
PERFORMANCE
Max. continuous operating voltage (Uc):
B to C: ±14 V
B or C to A: 14 V
Line to earth: ±140 V
Voltage protection level (Up):
• @ 1 kV (100 A)
2 to 3: ±30 V
2 or 3 to 1: 30 V
Line to earth: ±650 V
• @ 2 kV (1 kA)
2 to 3: ±30 V
2 or 3 to 1: 30 V
Line to earth: ±800 V
Response time: ≤ 0.1 μsec.
Leakage current:
B to C: ≤ 10 μA @ ±14 V DC
B or C to A: ≤ 10 μA @ 14 V DC
Line to earth: ≤ 10 μA @ ±140 V DC
Max. discharge current (Imax): 5000 A (8 / 20 μs)
Nominal current (IN): 50 mA
Internal series resistance: 10 Ω ±10 %
Capacitance @ 1 MHz:
Line to line: ≤ 1000 pF
Line to earth: ≤ 100 pF
Surge protection: IEC 61643-21 Categories C1, C2, D1
STANDARDS & APPROVALS
EU conformity:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
EN 50581
CONNECTION EXAMPLES
GROUNDING
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
MOUNTING REQUIREMENTS unit: mm (inch)
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
M-System Co., Ltd.
Products
-
MDK-LC LIGHTNING SURGE PROTECTOR FOR STRAIN GAUGE USE
-
MDP-TC LIGHTNING SURGE PROTECTOR FOR THERMOCOUPLE USE
-
MD7RB LIGHTNING SURGE PROTECTOR FOR RTD USE
-
MDP-RB LIGHTNING SURGE PROTECTOR FOR RTD USE
-
MD7PM LIGHTNING SURGE PROTECTOR FOR POTENTIOMETER USE
-
MDP-PM LIGHTNING SURGE PROTECTOR FOR POTENTIOMETER USE
-
MDK-LV LIGHTNING SURGE PROTECTOR FOR SIGNAL LINE WITH EXITATION USE
-
MD7TC LIGHTNING SURGE PROTECTOR FOR THERMOCOUPLE USE
-
MDP-LC LIGHTNING SURGE PROTECTOR FOR STRAIN GAUGE USE
PRODUCTS LIST
- Signal Conditioners
- 2-wire Signal Conditioners
- Power Transducers
- Indicators
- Tower Lights
- Limit Alarms
- Gateway, Remote IO
- Paperless Recording System
- PC Recorder
- Web Data Loggers
- PID Control Components
- BA&Energy Monitoring Components
- Temperature Controllers
- Electric Actuators
- Lightning Surge Protectors
STATISTIC
Visitor: 1055631Online: 9