Detail
·Some details are not shown. Please refer to specification sheets for all information.
MDP-D
Lightning Surge Protectors for
Electronics Equipment M-RESTER
LIGHTNING SURGE PROTECTOR FOR
DC POWER SUPPLY USE
Functions & Features
• Designed specifically for 12 V/24 V DC power supplies of small capacity
• Absorbs surges only without affecting instrumentation signal
• Monitor LED
Typical Applications
• DC power sources, switching regulators
• Power source for electronic devices
MODEL: MDP–D[1][2]
ORDERING INFORMATION
• Code number: MDP-D[1][2]
Specify a code from below for each [1] and [2].
(e.g. MDP-D24/A33/Q)
• Specify the specification for option code /Q
(e.g. /C01)
[1] OPERATIONAL VOLTAGE
12: 12 V DC
24: 24 V DC
[2] OPTIONS (multiple selections)
DIN Rail Mounting Adapter
blank: Without
/A33: With adapter (model A-33)
Other Options
blank: none
/Q: Option other than the above (specify the specification)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
/C02: Polyurethane coating
/C03: Rubber coating
GENERAL SPECIFICATIONS
Construction: Plug-in
Surge protection type: Voltage limiting type two-port SPD
Connection: M4 screw terminals (torque 0.8 N·m)
Screw terminal: Nickel-plated steel
Housing material: Flame-resistant resin (black)
Monitor LED: Green light turns ON during the power is supplied; OFF when the voltage limiter is failed.
INSTALLATION
Power input: Max. output current 1 A
Use a DC power source with the overload current protection.
Operating temperature: -5 to +55°C (23 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Surface or DIN rail
Weight: 140 g (0.31 lb), standard
165 g (0.36 lb), with DIN rail mounting adapter
PERFORMANCE
Max. continuous operating voltage (Uc):
MDP-D12 Line to line: 14 V
MDP-D24 Line to Line: 27 V
Line to earth: ±160 V
Voltage protection level (Up):
MDP-D12 Line to line: 20 V
MDP-D24 Line to Line: 40 V
Line to earth: ±650 V
Response time:
Line to line: ≤ 4 nsec.
Line to earth: ≤ 20 nsec.
Leakage current:
MDP-D12 Line to line: ≤ 3 mA @ 14 V DC
MDP-D24 Line to line: ≤ 6 mA @ 27 V DC
Line to earth: ≤ 0.1 mA @ ±160 V DC
Max. discharge current (Imax): 5000 A (8 / 20 μs)
Nominal current (IN): 1.0 A
Internal series resistance: ≤ 0.6 Ω (including return)
Surge protection: IEC 61643-1 Class III
STANDARDS & APPROVALS
EU conformity:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
EN 50581
CONNECTION EXAMPLES
GROUNDING
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
MOUNTING REQUIREMENTS unit: mm (inch)
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
M-System Co., Ltd.
Products
-
MDHA LIGHTNING SURGE PROTECTOR FOR POWER SUPPLY USE
MDHA Lightning Surge Protectors for Electronics Equipment M-RESTER LIGHTNING SURGE PROTECTOR FOR POWER SUPPLY USE
-
MDH LIGHTNING SURGE PROTECTOR FOR POWER SUPPLY USE
-
MD7DP LIGHTNING SURGE PROTECTOR FOR DC POWER SUPPLY
-
MATPH SURGE PROTECTOR FOR PHOTOVOLTAIC SYSTEM
MATPH Lightning Surge Protectors for Electronics Equipment M-RESTER SURGE PROTECTOR FOR PHOTOVOLTAIC SYSTEM
-
MATP SURGE PROTECTOR FOR PHOTOVOLTAIC SYSTEM
MATP Lightning Surge Protectors for Electronics Equipment M-RESTER SURGE PROTECTOR FOR PHOTOVOLTAIC SYSTEM
PRODUCTS LIST
- Signal Conditioners
- 2-wire Signal Conditioners
- Power Transducers
- Indicators
- Tower Lights
- Limit Alarms
- Gateway, Remote IO
- Paperless Recording System
- PC Recorder
- Web Data Loggers
- PID Control Components
- BA&Energy Monitoring Components
- Temperature Controllers
- Electric Actuators
- Lightning Surge Protectors
STATISTIC
Visitor: 1084561Online: 15