MDCAT-A LIGHTNING SURGE PROTECTOR FOR ETHERNET
Tình trạng: In stock
Contact: 0989649965
Số lượt xem: 1649
Detail
·Some details are not shown. Please refer to specification sheets for all information.
MDCAT-A
Lightning Surge Protectors for
Electronics Equipment M-RESTER
LIGHTNING SURGE PROTECTOR FOR ETHERNET
(PoE / 10 BASE-T / 100 BASE-TX / 1000 BASE-T, life monitor)
Functions & Features
• Designed specifically for Ethernet network
• Conforms with 1000 Base-T, PoE and PoE Plus
• LAN cable’s shield wire can be floating or grounding by a shortcircuit bar
• Pressing CHK (Check) button confirms with LEDs the life span of the surge protect device
• DIN rail mounting
MODEL: MDCAT-A-[1][2]
ORDERING INFORMATION
• Code number: MDCAT-A-[1][2]
Specify a code from below for each of [1] and [2].
(e.g. MDCAT-A-5E/DR/Q)
[1] CABLE CATEGORY
5E: CAT5e
6: CAT6
[2] OPTIONS (multiple selections)
Single mount DIN rail
blank: Without
/DR: With single mount DIN rail
Other Options
blank: none
/Q: Option other than the above (specify the specification)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
/C02: Polyurethane coating
/C03: Rubber coating
CAUTION
• When this unit is earthed via a DIN rail, use a steel or copper rail. Oxide film on the surface of an aluminium rail may lower the electric conductivity between this module and the ground.
• Single mount DIN rail for option code ‘/DR’ is made of aluminum. Connect to ground with ground terminal when this DIN rail is used.
PACKAGE INCLUDES...
LAN cable connected to the protected device (STP, 1 meter)
APPLICABLE NETWORK
10 BASE-T: IEEE 802.3i
100 BASE-TX: IEEE 802.3u
1000 BASE-T: IEEE 802.3ab
PoE: IEEE 802.3af
PoE Plus: IEEE802.3at
GENERAL SPECIFICATIONS
Connection
Ethernet: RJ-45 modular jack
Grounding: M3 screw terminal (torque 0.6 N·m)
or via DIN rail
Screw terminal: Nickel-plated brass
DIN rail material: Aluminum
Housing material: Flame-resistant resin (black)
Indicators: Activated by CHK (Check) button, see the status table shown below.
•BAT: Green LED
•ALM: Red LED
Life time judged: When the number of discharges of the discharge element reaches the expected life span.
CHK button: Push button; momentary
Battery: Lithium; No recharge or replacement available.
Battery life: 10 years (when used ≤ 2 minutes/month)
INSTALLATION
Operating temperature: -10 to +55°C (14 to 131°F)
Operating humidity: 5 to 95 %RH (non-condensing)
Mounting: DIN Rail (TH35-7.5, 1-mm-thick)
Weight: 160 g (0.35 lb) include the attached LAN cable
PERFORMANCE
Transmission performance:
TIA/EIA-568-B.2 CAT5e (MDCAT-A-5E)
TIA/EIA-568-B.2 CAT6 (MDCAT-A-6)
Surge protection: IEC 61643-21 Categories C1, C2
STANDARDS & APPROVALS
EU conformity:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
EN 50581
EXTERNAL VIEW
CONNECTION EXAMPLES
EXTERNAL DIMENSIONS unit: mm (inch)
SCHEMATIC CIRCUITRY
SYSTEM CONFIGURATION EXAMPLES
M-System Co., Ltd.
Products
-
MD-DNM LIGHTNING SURGE PROTECTOR FOR DeviceNet
-
MDP-4R LIGHTNING SURGE PROTECTOR FOR RS-485 / RS-422
-
MDW5-4R LIGHTNING SURGE PROTECTOR FOR RS-485 / RS-422
-
MDCAT LIGHTNING SURGE PROTECTOR FOR ETHERNET
-
MDM5E-A LIGHTNING SURGE PROTECTOR FOR ETHERNET
-
SHSP 8-PORT ETHERNET SWITCH
SHSP 8-PORT ETHERNET SWITCH (with surge protector)
-
MD74R LIGHTNING SURGE PROTECTOR FOR RS-485 / RS-422
-
MDCAT-NC LIGHTNING SURGE PROTECTOR FOR CC-Link IE Field Network
-
MD7FB LIGHTNING SURGE PROTECTOR FOR FOUNDATION Fieldbus
PRODUCTS LIST
- Signal Conditioners
- 2-wire Signal Conditioners
- Power Transducers
- Indicators
- Tower Lights
- Limit Alarms
- Gateway, Remote IO
- Paperless Recording System
- PC Recorder
- Web Data Loggers
- PID Control Components
- BA&Energy Monitoring Components
- Temperature Controllers
- Electric Actuators
- Lightning Surge Protectors
STATISTIC
Visitor: 1045788Online: 8