MD7LWA LIGHTNING SURGE PROTECTOR FOR LonWorks
Tình trạng: In stock
Contact: 0989649965
Số lượt xem: 1037
Detail
·Some details are not shown. Please refer to specification sheets for all information.
MD7LWA
Lightning Surge Protectors for
Electronics Equipment M-RESTER
LIGHTNING SURGE PROTECTOR FOR
LonWorks
(ultra-slim, FTT-10A)
Functions & Features
• High discharge current capacity 20 kA (8 / 20 μs), 1 kA (10 / 350 μs)
• Ultra-thin 7-mm-wide module can be mounted
in high density
• Excellent protection employing multi-stage SPD circuits
• DIN rail mounting and grounding
• Shield terminal provided
MODEL: MD7LWA–[1][2]
ORDERING INFORMATION
• Code number: MD7LWA-[1][2]
Specify a code from below for each [1] and [2].
(e.g. MD7LWA-FF/Q)
For the safety approval code /E2, specify the product’s destination country using Ordering Information Sheet (No. ESU-8060).
• Specify the specification for option code /Q
(e.g. /C01)
[1] SHIELD TERMINAL (to earth)
FF: Floating
FG: Grounding
[2] OPTIONS
Safety Approval
blank: Without
/E2: CENELEC intrinsic safety (ATEX)
Other Options
blank: none
/Q: Option other than the above (specify the specification)
(CENELEC intrinsic safety (ATEX) not available)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
/C02: Polyurethane coating
APPLICABLE NETWORK
LonWorks FTT-10A network
This unit is not applicable to LonWorks Link Power network.
GENERAL SPECIFICATIONS
Construction: Slim-sized front terminal structure
Degree of protection: IP20
Connection: Euro terminal block (torque 0.3 N·m)
Applicable wire size: 0.2 – 2.5 mm2, stripped length: 8 mm
Grounding: DIN Rail
Housing material: Flame-resistant resin (black)
INSTALLATION
Operating temperature: -25 to +85°C (-13 to +185°F)
(See Safety Parameters for use in a hazardous location.)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: DIN Rail (TH35-7.5, 1-mm-thick)
Oxide film on the surface of an aluminium DIN rail may lower the electric conductivity between this module and the ground. Use a steel or copper rail.
Weight: 70 g (2.5 oz)
PERFORMANCE
*1. Values for the floating type (FF). Shortcircuited for the grounding type (FG).
STANDARDS & APPROVALS
EU conformity:
ATEX Directive
Ex ia EN 60079-11
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
EN 50581
Safety approval:
Surge protection: IEC 61643-21
(Categories C1, C2, D1)
SAFETY PARAMETERS
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
M-System Co., Ltd.
Products
-
MDCAT-NC LIGHTNING SURGE PROTECTOR FOR CC-Link IE Field Network
-
MDP-4R LIGHTNING SURGE PROTECTOR FOR RS-485 / RS-422
-
MDW5-4R LIGHTNING SURGE PROTECTOR FOR RS-485 / RS-422
-
MDCAT-A LIGHTNING SURGE PROTECTOR FOR ETHERNET
-
MDCAT LIGHTNING SURGE PROTECTOR FOR ETHERNET
-
MDM5E-A LIGHTNING SURGE PROTECTOR FOR ETHERNET
-
MD74R LIGHTNING SURGE PROTECTOR FOR RS-485 / RS-422
-
MDW5-CC LIGHTNING SURGE PROTECTOR FOR CC-Link
-
MD7FB LIGHTNING SURGE PROTECTOR FOR FOUNDATION Fieldbus
PRODUCTS LIST
- Signal Conditioners
- 2-wire Signal Conditioners
- Power Transducers
- Indicators
- Tower Lights
- Limit Alarms
- Gateway, Remote IO
- Paperless Recording System
- PC Recorder
- Web Data Loggers
- PID Control Components
- BA&Energy Monitoring Components
- Temperature Controllers
- Electric Actuators
- Lightning Surge Protectors
STATISTIC
Visitor: 1034138Online: 9