MD7LC LIGHTNING SURGE PROTECTOR FOR STRAIN GAUGE
Tình trạng: In stock
Contact: 0989649965
Số lượt xem: 1084
Detail
·Some details are not shown. Please refer to specification sheets for all information.
MD7LC
Lightning Surge Protectors for
Electronics Equipment M-RESTER
LIGHTNING SURGE PROTECTOR FOR
STRAIN GAUGE
(ultra-slim)
Functions & Features
• High discharge current capacity 20 kA (8 / 20 μs), 1 kA (10 / 350 μs)
• Ultra-thin 7-mm-wide module can be mounted in high density
• Excellent protection employing multi-stage SPD circuits
• DIN rail mounting and grounding
• Shield terminal provided
• Protects strain gauges and transmitters
MODEL: MD7LC–[1][2][3]
ORDERING INFORMATION
• Code number: MD7LC-[1][2][3]
Specify a code from below for each [1] through [3].
(e.g. MD7LC-10/Q)
For the safety approval code 2, specify the product’s destination country using Ordering Information Sheet (No. ESU-8057).
• Specify the specification for option code /Q
(e.g. /C01)
[1] SERIES RESISTANCE
0: Without (No CE marking; CENELEC/ATEX approval not
available)
1: With
[2] SAFETY APPROVAL
0: None
2: CENELEC intrinsic safety (ATEX)
[3] OPTIONS
blank: none
/Q: With options (specify the specification)
(CENELEC intrinsic safety (ATEX) not available)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
/C02: Polyurethane coating
RELATED PRODUCTS
• Terminal block for grounding (model: MD7G)
GENERAL SPECIFICATIONS
Construction: Slim-sized front terminal structure
Degree of protection: IP20
Connection: Euro terminal block (torque 0.3 N·m)
Applicable wire size: 0.2 – 2.5 mm2, stripped length: 8 mm
Grounding: DIN Rail
Housing material: Flame-resistant resin (black)
INSTALLATION
Operating temperature: -25 to +85°C (-13 to +185°F)
(See Safety Parameters for use in a hazardous location.)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: DIN Rail (TH35-7.5, 1-mm-thick)
Oxide film on the surface of an aluminium DIN rail may lower the electric conductivity between this module and the ground. Use a steel or copper rail.
Weight: 70 g (2.5 oz)
PERFORMANCE
STANDARDS & APPROVALS
EU conformity:
ATEX Directive
Ex ia EN 60079-11
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
EN 50581
Safety approval:
Surge protection:
IEC 61643-21
EN 61643-21
(Categories C1, C2, D1;
applicable with series resistance only)
SAFETY PARAMETERS
CONNECTION EXAMPLES
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
SCHEMATIC CIRCUITRY
M-System Co., Ltd.
Products
-
MD-LC2 LIGHTNING SURGE PROTECTOR FOR STRAIN GAUGE USE
-
MDP-TC LIGHTNING SURGE PROTECTOR FOR THERMOCOUPLE USE
-
MD7RB LIGHTNING SURGE PROTECTOR FOR RTD USE
-
MDP-RB LIGHTNING SURGE PROTECTOR FOR RTD USE
-
MD7PM LIGHTNING SURGE PROTECTOR FOR POTENTIOMETER USE
-
MDP-PM LIGHTNING SURGE PROTECTOR FOR POTENTIOMETER USE
-
MDK-LV LIGHTNING SURGE PROTECTOR FOR SIGNAL LINE WITH EXITATION USE
-
MD7TC LIGHTNING SURGE PROTECTOR FOR THERMOCOUPLE USE
-
MDK-LC LIGHTNING SURGE PROTECTOR FOR STRAIN GAUGE USE
PRODUCTS LIST
- Signal Conditioners
- 2-wire Signal Conditioners
- Power Transducers
- Indicators
- Tower Lights
- Limit Alarms
- Gateway, Remote IO
- Paperless Recording System
- PC Recorder
- Web Data Loggers
- PID Control Components
- BA&Energy Monitoring Components
- Temperature Controllers
- Electric Actuators
- Lightning Surge Protectors
STATISTIC
Visitor: 1061835Online: 20