MD7AP LIGHTNING SURGE PROTECTOR
Tình trạng: In stock
Contact: 0989649965
MD7AP Lightning Surge Protectors for Electronics Equipment M-RESTER
Số lượt xem: 1066
Detail
·Some details are not shown. Please refer to specification sheets for all information.
MD7AP
Lightning Surge Protectors for
Electronics Equipment M-RESTER
LIGHTNING SURGE PROTECTOR FOR
AC POWER SUPPLY
(max. 3A; ultra-slim)
Functions & Features
• High discharge current capacity 10 kA (8 / 20 μs)
• Ultra-thin 7-mm-wide module can be mounted
in high density
• Excellent protection employing multi-stage SPD circuits
• DIN rail mounting and grounding
• Power line monitor LED
Typical Applications
• Protecting small capacity AC control drives
• Protecting small capacity power supply units
MODEL: MD7AP-[1][2]
ORDERING INFORMATION
• Code number: MD7AP-[1][2]
Specify a code from below for each [1] and [2].
(e.g. MD7AP-100/Q)
• Specify the specification for option code /Q
(e.g. /C01)
[1] OPERATIONAL VOLTAGE
100: 100 V / 110 V / 120 V AC
200: 200 V / 220 V / 240 V AC
[2] OPTIONS
blank: none
/Q: With options (specify the specification)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
/C02: Polyurethane coating
GENERAL SPECIFICATIONS
Construction: Slim-sized front terminal structure
Degree of protection: IP20
Connection: Euro terminal block (torque 0.3 N·m)
Applicable wire size: 0.2 – 2.5 mm2, stripped length 8 mm
Grounding: DIN Rail
Housing material: Flame-resistant resin (black)
Monitor LED: Green LED turns ON when the voltage is supplied; OFF when the safety fuse is blown.
INSTALLATION
AC power supply: Max. output current 3 A
Caution: Use an AC power source with the overload current protection function.
Operating temperature: -25 to +85°C (-13 to +185°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: DIN Rail (TH35-7.5, 1-mm-thick)
Oxide film on the surface of an aluminium DIN rail may lower the electric conductivity between this module and the ground. Use a steel or copper rail.
Weight: 85 g (3.0 oz)
PERFORMANCE
STANDARDS & APPROVALS
EU conformity:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
Low Voltage Directive
EN 61643-21
RoHS Directive
EN 50581
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
M-System Co., Ltd.
Products
-
MEL SURGE ABSORBER ELEMENT
MEL Lightning Surge Protectors for Electronics Equipment M-RESTER SURGE ABSORBER ELEMENT (For MAX use)
-
MDP-200T LIGHTNING SURGE PROTECTOR
MDP-200T Lightning Surge Protectors for Electronics Equipment M-RESTER
-
MGA-100 LIGHTNING SURGE PROTECTOR
-
MGA-200 LIGHTNING SURGE PROTECTOR
MGA-200 Lightning Surge Protectors for Electronics Equipment M-RESTER LIGHTNING SURGE PROTECTOR FOR POWER SUPPLY USE (2 A, 250 V AC / 350 V DC; rack mounted)
-
MA-100 LIGHTNING SURGE PROTECTOR
MA-100 Lightning Surge Protectors for Electronics Equipment M-RESTER LIGHTNING SURGE PROTECTOR FOR POWER SUPPLY (2 A, 100 / 110 / 120 V AC)
-
MA-200 LIGHTNING SURGE PROTECTOR
MA-200 Lightning Surge Protectors for Electronics Equipment M-RESTER LIGHTNING SURGE PROTECTOR FOR POWER SUPPLY (2 A, 200 / 220 / 240 V AC)
-
MAAC LIGHTNING SURGE PROTECTOR
MAAC Lightning Surge Protectors for Electronics Equipment M-RESTER LIGHTNING SURGE PROTECTOR FOR POWER SUPPLY USE
-
MMAJ LIGHTNING SURGE PROTECTOR
MMAJ Lightning Surge Protectors for Electronics Equipment M-RESTER LIGHTNING SURGE PROTECTOR FOR POWER SUPPLY USE
-
MMA LIGHTNING SURGE PROTECTOR
MMA Lightning Surge Protectors for Electronics Equipment M-RESTER LIGHTNING SURGE PROTECTOR FOR POWER SUPPLY USE
PRODUCTS LIST
- Signal Conditioners
- 2-wire Signal Conditioners
- Power Transducers
- Indicators
- Tower Lights
- Limit Alarms
- Gateway, Remote IO
- Paperless Recording System
- PC Recorder
- Web Data Loggers
- PID Control Components
- BA&Energy Monitoring Components
- Temperature Controllers
- Electric Actuators
- Lightning Surge Protectors
STATISTIC
Visitor: 1070229Online: 19